Atomistic simulation of kink structure on edge dislocation in bcc iron

Based on the general theory of dislocation and kink, we have constructed the three kink models corresponding to the 1/2 （111）{011} and 1/2 （111）{112} edge dislocations （EDs） in bcc Fe using the molecular dynamics method. We found that the geometric structure of a kink depends on the type of ED and the structural energies of the atom sites in the dislocation core region, as well as the geometric symmetry of the dislocation core and the characteristic of the stacking sequence of atomic plane along the dislocation line. The formation energies and widths of the kinks on the 1/2 （111）{011} and 1/2 （111）{112} EDs are calculated, the formation energies are 0.05eV and 0.04eV, and widths are 6.02b and 6.51b, respectively （b is the magnitude of the Burgers vector）. The small formation energies indicate that the formation of kink in the edge dislocation is very easy in bcc Fe.     

Modelling of spreading process: effect from hydrogen bonds

Lubricant spreading on solid substrates has drawn considerable attention not only for the microscopic wetting theory but also for the dramatic application in head-disk interface of magnetic storage drive systems. Molecular dynamic simulation based on a coarse-grained bead-spring model has been used to study such a spreading process. The spreading profiles indicate that the hydrogen bonds among lubricant molecules and the hydrogen bonds between lubricant molecules and polar atoms of solid substrates will complicate the spreading process in a tremendous degree. The hydrogen bonds among lubricant molecules will strengthen the lubricant combination intensity, which may hinder most molecules from flowing down to the substrates and diffusing along the substrates. And the hydrogen bonds between lubricant molecules and polar atoms of solid substrates will confine the lubricant molecules around polar atoms, which may hinder the molecules from diffusing along the substrates and cause precursor film to vanish.     

Bound entangled states invariant under Ux

This paper obtains an entangled condition for isotropic-like states by using an atomic map. It constructs a class of bound entangled states from the entangled condition and shows that the partial transposition of the state from the constructed bound entangled class is an edge bound entangled state by using range criterion.     

Could one single dichotomous noise cause resonant activation for exit time over potential barrier？

This paper studies the mean first passage time （or exit time, or escape time） over the non-fluctuating potential harrier for a system driven only by a dichotomous noise. It finds that the dichotomous noise can make the particles escape over the potential barrier, in some circumstances; but in other circumstances, it can not. In the case that the particles escape over the potential harrier, a resonant activation phenomenon for the mean first passage time over the potential barrier is obtained.     

Steady state speed distribution analysis for a combined cellular automaton traffic model

Cellular Automaton （CA） based traffic flow models have been extensively studied due to their effectiveness and simplicity in recent years. This paper develops a discrete time Markov chain （DTMC） analytical framework for a Nagel-Schreckenberg and Fukui Ishibashi combined CA model （W^2H traffic flow model） from microscopic point of view to capture the macroscopic steady state speed distributions. The inter-vehicle spacing Maxkov chain and the steady state speed Markov chain are proved to be irreducible and ergodic. The theoretical speed probability distributions depending on the traffic density and stochastic delay probability are in good accordance with numerical simulations. The derived fundamental diagram of the average speed from theoretical speed distributions is equivalent to the results in the previous work.     

Influence of reaction gas flows on the properties of SiGe:H thin film prepared by plasma assisted reactive thermal chemical vapour deposition

A new preparing technology, very high frequency plasma assisted reactive thermal chemical vapour deposition （VHFPA-RTCVD）, is introduced to prepare SiGe：H thin films on substrate kept at a lower temperature. In the previous work, reactive thermal chemical vapour deposition （I~TCVD） technology was successfully used to prepare SiGe：H thin films, but the temperature of the substrate needed to exceed 400℃. In this work, very high frequency plasma method is used to assist RTCVD technology in reducing the temperature of substrate by largely enhancing the temperature of reacting gases on the surface of the substrate. The growth rate, structural properties, surface morphology, photo- conductivity and dark-conductivity of SiGe：H thin films prepared by this new technology are investigated for films with different germanium concentrations, and the experimental results are discussed.     

强磁场条件下Mn-Sb梯度复合材料的制备

研究了Mn-898wt%Sb合金在无磁场以及磁场为B=88 T、不同强度的磁场梯度作用下的凝固组织变化，并分析了上述不同强磁场条件对合金凝固组织影响的作用机理.研究表明，在较大梯度磁场作用时，试样中出现了初生MnSb相与Sb相以及共晶组织共存的现象，而且初生MnSb相与Sb相产生了明显的分层现象.此外，磁场梯度作用下初生MnSb相和Sb相的含量随着磁场梯度的增大而增加.论文对初生MnSb相和Sb相的分离机理进行了探讨，发现在梯度磁场作用下，熔融金属中不同磁化率的合金组元团簇受力不同，造成     

基于非线性材料二次谐波与混频特性非逻辑门运算的全光实现(英文)

Optics has already been proved as a successful candidate for conducting parallel logic, arithmetic and algebraic operations. Several all-optical data processors were proposed since last few decades. To implement these systems, different data encoding decoding techniques such as polarization encoding, tristate, quartenary state, multivalued state, symbolic substitution technique etc. have already been proposed. All these are done to use optics in a suitable platform. We propose here a new concept of encoding data by adopting frequencies variation technique for conducting a inversion operation successfully.     

不锈钢材料及TiN镀膜处理后PSD测试实验研究

PSD性能是评价电子储存环真空室材料及材料表面处理优劣的一个重要指标.对一约1.5m长不锈钢管道真空室进行了镀TiN薄膜处理,并在合肥光源机器研究用光束线(MSB)的PSD实验站上对该真空室在镀TiN薄膜处理前后分别进行了PSD性能测试实验研究.测试研究结果表明,TiN薄膜处理对于减小不锈钢材料PSD有非常明显的作用.     

射频超导技术与ERL技术新进展

射频超导谐振腔可以工作在连续波或长宏脉冲模式.射频超导技术已发展为加速各种带电粒子束的重要手段.射频超导技术发展的前期受材料性能、腔的处理以及加工安装水平等的限制.经过几十年的不断改进,射频超导技术获得了重大突破.射频超导腔应用到超导加速器上并成功运行,积累了腔的质量控制工艺和工业化制备的大量经验.近期国际上面对未来大科学装置项目,在射频超导技术方面进行了大量的研发工作,主要包括提高超导腔加速梯度的新腔型研究和采用新型材料(大晶粒铌材)超导腔的研究.能量回收直线加速器(ERL)技术是近年来获得发展的重要加速器技术.ERL具有高效、节能、稳定性好、低辐射水平等优势,被越来越多地应用到先进光源和自由电子激光装置中.